ICnova ADB1002

Hardware

The ICnova ADB1002 is an evaluation board which is ideal to develop network applications. It works with all ICnova OEM Modules.

ICnova ADB1002

It is ideal for developing:

• Radio sniffer applications
• Home automation
• embedded Linux Board with DVI-Interface
• Wireless Gateway

The ICnova ADB1002 has the following features:

• 1x Socket for ICnova OEM Modules
• 1x Socket for ICradio OEM Modules
• 1x DVI–Interface for direct monitor support
• 1x 10/100MBit Ethernet (MII)
• 1x USB 2.0 High Speed Host (480 MBit)
• 1x USB 2.0 High Speed Device (480 MBit)
• 1x UART on Pinheader
• 1x JTAG for ICnova OEM
• 1x JTAG for Radio OEM
• 2x µSD card holder with MMI and SPI interface
• 1x Real-Time-Clock buffered with Li-Ion battery
• 1x I²C (TWI)on Pinheader
• Dimensions: 100mm x 120mm
• Power Supply from USB-Device Port or 5VDC Supply over Power Jack
• Power consumption about 1.5W

The ICnova ADB1002 and appropriate ICnova CPU-Modules can be ordered at our Shop.

Software

All Modules provided by In-Circuit usally have a Buildroot based system preinstalled, so they can be used out of the box. For some configuration a suitable Android-Image is provided, too.

Downloads

Datasheet ICnova ADB1002

Schematic ICnova ADB1002