ICnova SAM9G45+XC3S700AN OEM
Contents |
Hardware
ICnova SAM9G45B+XC3S700AN OEM
The power of a complete Linux System paired with the flexibility of a tightly coupled FPGA.
The board is ready to go and only requires a single power supply voltage between 3.3V and 5V. The Linux Kernel is 100% open source and can either be downloaded or ordered as a CD.
A complete reference design for the FPGA is also available. Using an ICnova SAM9G45+XC3S700AN module, the development of the main-board can be kept simple and low-cost by avoiding a multi-layer board design.
Features:
- Atmel ARM9 AT91SAM9G45B processor with up to 400 MHz CPU clock
- 128MB DDR2-RAM
- 1MB NOR-Flash
- 256MB NAND Flash
- 1xHigh speed (480MBit) USB Host
- 1xHigh speed (480MBit) USB Device (configurable by software as 2nd Host)
- voltage regulators for 3.3V and 1.8V core voltage
- all peripherals are accessible on connectors
- extreme compact design with 40x35mm overall size
- SPARTAN 3AN FPGA from Xilinx
- 256MB DDR2 RAM connected directly to the FPGA
- 222 IOs available on the Hirose connectores, most of them supporting LVDS high speed channels
- The FPGA is mapped into the G45′s memory space through a 32bit wide interface
- The ARM is capable to configure and flash the FPGA
The ICnova SAM9G45+XC3S700AN OEM can be ordered at our Shop.
Suitable application development boards
Template:adb-table Template:adb-table Template:adb-table Template:adb-table
Software
More information on the FPGA reference design as well as design services are available from our partner: www.loginovo.com
Take a look at our HowTo Category for some further information.
