Difference between revisions of "ICnova i.MX536 SODIMM"
| Line 56: | Line 56: | ||
If you are new to kernel building please refer to [[First Steps with Buildroot]]. | If you are new to kernel building please refer to [[First Steps with Buildroot]]. | ||
| − | The Board support packages listed in table above contain all sources required to build the linux image for the {{PAGENAME}} | + | The Board support packages listed in table above contain all sources required to build the linux image for the different combinations with the {{PAGENAME}}. |
On the {{PAGENAME}} the bootloader barebox is preinstalled on the on-board flash.<br /> | On the {{PAGENAME}} the bootloader barebox is preinstalled on the on-board flash.<br /> | ||
Revision as of 17:16, 18 September 2014
Contents |
Hardware
ICnova i.MX536 SODIMM - high end Cortex SODIMM-200 module
The device ICnova i.MX536 SODIMM is equipped with a Freescale i.MX536 MCU.
It operates with an Cortex-A8 core at 800 MHz CPU clock.
Features:
- Freescale i.MX536 Cortex-A8 processor with up to 800 MHz CPU clock
- 512 MByte DDR3-RAM
- 8 MByte parallel NOR-Flash for fast booting
- 4 GByte NAND Flash
- Integrated 10/100 MBit Ethernet PHY
- Interfaces: Ethernet, USB Host+Device, SATA, UARTs, SPIs, LCD (TTL and LVDS), Camera IF...
- All voltage regulators on board, Input voltage should be 5V+-10%
- All peripherals are accessible on connectors
- Easy to use SODIMM-200 module (2.5V-Version)
- Commercial temperature range from -20°C to +70°C
- Long term availability (>5 years)
Application development boards
In-Circuit offers a wide range of evaluation boards that can be used to develop your products and solutions while reducing your development time. These evaluation boards help you to evaluate the features and performance of selected products and system solutions. Our evaluation boards demonstrate optimized and tested solutions for your application design. These boards are designed mainly for your evaluation, design and testing purposes.
The table below shows the suitable Application Development Boards (ADB) for the ICnova i.MX536 SODIMM.
| ADB | Main features | BSP Linux-Buildroot |
|---|---|---|
| ADB4001 | Ethernet, USB Host, USB Device, 3xRS485, RS232, CAN, 2xµSD card reader, DAC, 2xADC, Relay OUT, 7" Display, DVI Connector, Video IN, Soundcard, 2 sockets for ICradio-ZWIR4512-OEM modules |
2.6.35-2012.11 |
Software
All Modules provided by In-Circuit usally have a Buildroot based system preinstalled, so they can be used out of the box.
Login as "root" for which no password is set.
If you are new to kernel building please refer to First Steps with Buildroot.
The Board support packages listed in table above contain all sources required to build the linux image for the different combinations with the ICnova i.MX536 SODIMM.
On the ICnova i.MX536 SODIMM the bootloader barebox is preinstalled on the on-board flash.
Generally the bootloaders on our modules are configured to loook for a bootable linux image on the SD-Card and only boot from flash if none are found.
