ICnova i.MX536 SODIMM
Contents |
Hardware
ICnova i.MX536 SODIMM - high end Cortex SODIMM-200 module
The device ICnova i.MX536 SODIMM is equipped with a Freescale i.MX536 MCU.
It operates with an Cortex-A8 core at 800 MHz CPU clock.
Features:
- Freescale i.MX536 Cortex-A8 processor with up to 800 MHz CPU clock
- 512 MByte DDR3-RAM
- 8 MByte parallel NOR-Flash for fast booting
- 4 GByte NAND Flash
- Integrated 10/100 MBit Ethernet PHY
- Interfaces: CAN, Ethernet, USB Host+Device, SATA, UARTs, SPIs, LCD (TTL and LVDS), Camera IF...
- All voltage regulators on board, Input voltage should be 5V+-10%
- All peripherals are accessible on connectors
- Easy to use SODIMM-200 module (2.5V-Version)
- Commercial temperature range from -20°C to +70°C
- Long term availability (>5 years)
Suitable application development boards
Software
All Modules provided by In-Circuit usally have a Buildroot based system preinstalled, so they can be used out of the box.
Login as "root" for which no password is set.
If you are new to kernel building please refer to First Steps with Buildroot.
The Board support packages listed in table above contain all sources required to build the linux image for the different combinations with the ICnova i.MX536 SODIMM.
If an older version of the BSP is needed please look at our Downloads section.
Generally the bootloaders on our modules are configured to loook for a bootable linux image on the SD-Card and only boot from flash if none is found.
On the ICnova i.MX536 SODIMM the bootloader barebox is preinstalled on the on-board flash.
