Difference between revisions of "Interface Modules"
(→USB-A UART Bridge CP2102) |
(→USB-B UART Bridge CP2102) |
||
Line 48: | Line 48: | ||
<div class="tright" style="clear:none">[[File:USB-B UART Bridge.jpeg |200px | thumb | right | USB-B UART Bridge CP2102 | link=http://shop.in-circuit.de/product_info.php?cPath=38&products_id=80]]</div> | <div class="tright" style="clear:none">[[File:USB-B UART Bridge.jpeg |200px | thumb | right | USB-B UART Bridge CP2102 | link=http://shop.in-circuit.de/product_info.php?cPath=38&products_id=80]]</div> | ||
+ | The USB-UART-Bridge connects UART components with an USB-Host. The Bridge generates a 3.3V Voltage from USB ( maximum 100mA@3.3V). | ||
+ | |||
+ | '''Features:''' | ||
+ | *Baud rate: 300Bit/sec up to 1MBit/sec | ||
+ | *Voltage-regulator: up to 100mA@3.3V | ||
+ | *LEDs: RX and TX | ||
+ | *IO: RX ( to connect with RX on the µC), TX (to connect with TX on the µC) | ||
+ | *all Handshake signals are available on pin headers | ||
+ | |||
+ | |||
+ | <br/> | ||
Downloads:<br/> | Downloads:<br/> | ||
*Driver: CP2102 [http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx CP201x Driver]<br/> | *Driver: CP2102 [http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx CP201x Driver]<br/> |
Revision as of 13:36, 9 February 2017
Contents |
USB-A UART Bridge CP2104
The USB-UART-Bridge connects UART components with an USB-Host. The Bridge generates a 3.45V Voltage from USB. This can be used to supply the microcontroller over a jumper (maximum 100mA@3.45V).
Features:
- Baud rate: 300Bit/sec up to 2MBit/sec
- GPIOs 0-3 are set to push/pull at delivery state! (so LEDs, TxEN and GPIO are working)
- Voltage-regulator: up to 100mA@3.45V
- LEDs: Power, RX and TX
- IO: RX ( to connect with RX on the µC),TX (to connect with TX on the µC), GND, VCC
- Size: (LxWxH)(mm): 52.0 x 17.0 x 5.2
Downloads:
- Driver: CP201x Driver
- Datasheet: Datasheet USB-A UART Bridge CP2104
- Schematic: Schematic USB-A UART Bridge CP2104
The USB-A UART Bridge CP2104 can be ordered at our Shop
USB-A UART Bridge CP2102
The USB-UART-Bridge connects UART components with an USB-Host. The Bridge generates a 3.3V Voltage from USB. This can be used to supply the microcontroller over a jumper (maximum 100mA@3.3V).
Features:
- Baud rate: 300Bit/sec up to 1MBit/sec
- Voltage-regulator: up to 100mA@3.3V
- LEDs: Power, RX and TX
- IO: RX ( to connect with RX on the µC),TX (to connect with TX on the µC), GND, VCC
- Size: (LxWxH)(mm): 45.0 x 15.0 x 5.2
Downloads:
- Driver: CP201x Driver
- How to install drivers for CP2102 (german)
- Datasheet: Datasheet USB-A UART Bridge CP2102
- Schematic: Schematic USB-A UART Bridge CP2102
The USB-A UART Bridge CP2102 can be ordered at our Shop
USB-B UART Bridge CP2102
The USB-UART-Bridge connects UART components with an USB-Host. The Bridge generates a 3.3V Voltage from USB ( maximum 100mA@3.3V).
Features:
- Baud rate: 300Bit/sec up to 1MBit/sec
- Voltage-regulator: up to 100mA@3.3V
- LEDs: RX and TX
- IO: RX ( to connect with RX on the µC), TX (to connect with TX on the µC)
- all Handshake signals are available on pin headers
Downloads:
- Driver: CP2102 CP201x Driver
- How to install drivers for CP2102 (german)
- Datasheet: Datasheet USB-B UART Bridge CP2102
- Schematic: Schematic USB-B UART Bridge CP2102
The USB-B UART Bridge CP2102 can be ordered at our Shop
USB-RS485-Bridge
Downloads:
- Driver: VCP Drivers
- Datasheet: Datasheet USB RS485 Bridge
- Schematic: Schematic USB RS485 Bridge
The USB RS485 Bridge can be ordered at our Shop