ICflyMotorbox 912
Contents |
General Information
The ICflyMotorbox reads engine data from the Rotax 912 and makes it available via ICflyBus as an NMEA dataset. The engine data can be displayed on an ICflyDisplay or be transmitted by an ICflyAHRSII or ICflyConnect via WiFi to wireless devices. The SkyMap-App directly supports the ICfly Motorbox.
The ICflyMotorbox can either be connected directly to the sensor lines of the Rotax or be clamped parallel to existing motor data displays. The required calibration can be realized very comfortably using the Windows tool.
Features
- ICflyBus: wired connection between ICfly devices (ICflyAHRSII, ICflyDisplay, ICflyMotorbox 912 and more)
- Power supply for other ICfly devices via ICflyBus
- Depiction of engine data via SkyMap
- Windows-Tool for easy configuration and calibration
Connections
- 2x ICflyBus
- CAN bus (for head-up display)
- 2x thermocouple (EGT)
- from engine
- RPM
- MAP
- FLAPS
- Oil pressure and temperature
- Fuel pressure
- FUEL_R, FUEL_L, FUEL_F
- 2x CHT
- AirBoxTemp
- OAT
Firmwareupdate
The firmware of the ICflyMotorbox can be updated via SD-Card.
Just extract the firmwareupdate to a FAT-formatted uSD-Card, insert it into the ICflyMotorbox and apply power to the ICflyMotorbox. Then the firmware will be updated automatically.
Please refer to the table below for all available firmware-updates.
Firmwareversion | Description | Downloadlink |
---|---|---|
0.12 | Fix data output of flap position |
Download |
0.11 | Initial Firmware Release |
Download |
Configuration-Tool
The ICflyMotorbox can be configured using a Windows-Tool.
An ICflyAHRSII or ICflyConnect is required to provide WLAN-connectivity to the ICflyMotorbox.
- Connect your Windows-PC via WLAN to your ICflyAHRSII or ICflyConnect
- Open the website of your ICflyAHRSII or ICflyConnect to configure the correct baudrate settings (http://192.168.42.1)
- Start the ICflyMotorbox Configuration-Tool
- Connect to your ICflyMotorbox
Functions:
- Import / Export ICflyMotorbox configuration
- Load / Store single channel configuration
- Load / Store single channel LUT (Look-Up-Table) to configure the channels
Recommended operation system:
- Windows 10
Please refer to the table below for all available versions of the ICflyMotorbox Configuration-Tool.
Version | Description | Downloadlink |
---|---|---|
1.0.11 | Initial Release |
Download |
Downloads
Datasheet ICflyMotorbox 912 (german)
ICflyMotorbox 912 NMEA Specification (german)