Difference between revisions of "ICnova ADB4000"

From InCircuit
Jump to: navigation, search
Line 46: Line 46:
 
The {{PAGENAME}} and appropriate [[:Category:ICnova CPU-Modules|ICnova CPU-Modules]] can be ordered at our [http://shop.in-circuit.de/products/ICnova-CPU-Module/Starterkits/50/STK-ADB4000-8inch-ICnova-SAM9G45-SODIMM Shop]
 
The {{PAGENAME}} and appropriate [[:Category:ICnova CPU-Modules|ICnova CPU-Modules]] can be ordered at our [http://shop.in-circuit.de/products/ICnova-CPU-Module/Starterkits/50/STK-ADB4000-8inch-ICnova-SAM9G45-SODIMM Shop]
  
 +
 +
== Suitable CPU Modules ==
 +
{{Modules|intro}}
 +
{{Modules|header}}
 +
{{Modules|}}
 +
{{Modules|footer}}
  
 
== Software ==
 
== Software ==
 +
{{Software}}
  
All Modules provided by In-Circuit usally have a [[:Category:Buildroot|Buildroot]] based system preinstalled, so they can be used out of the box. For some configuration a suitable [[:Category:Android|Android]]-Image is provided, too.
+
For some configuration a suitable [[:Category:Android|Android]]-Image is provided, too.
 
Apps can easily be copied to a micro-SD card and inserted into the SD-Card slot of the ADB4000. The system copies the application automatically into its system folder and it can be started immediately.
 
Apps can easily be copied to a micro-SD card and inserted into the SD-Card slot of the ADB4000. The system copies the application automatically into its system folder and it can be started immediately.
  

Revision as of 17:19, 30 September 2014

Template:Under construction

Contents

Hardware

ICnova ADB4000

The ICnova ADB4000 is a ready to go touch display solution with 5inch or 8inch display and ICnova SAM9G45 SODIMM. Just connect to power and see the Linux or Android booting up in display!


The ICnova ADB4000 is designed for:

  • Smart Home Applications
  • Data logger for Solar applications
  • Industrial control devices


The ICnova ADB4000 has the following features:

  • 1x 10/100 Base-T-Ethernet-Port
  • 3x High-Speed-USB 2.0 Host ports
  • 1x High-Speed-USB 2.0 Device Port
  • 1x TFT-Touchscreen display connector
  • 2x SD/MMC card holder with MMI interface
  • 1x DBG UART
  • 3x isolated RS485 interfaces
  • 1x CAN interface
  • 1x RS232 interface
  • 1x I2C interface
  • 1x Buzzer
  • 1x Real-Time-Clock battery buffered
  • 5x Digital inputs
  • 2x Analog inputs 0-10V or 4-20mA
  • 1x Line-In
  • 1x Line-Out
  • 1x Mic-In
  • 1x Headphone-Out
  • 2x JTAG-interface (compatible with JTAGICE-mkII)
  • 2x Socket for ICradio OEM Modules
  • Dimensions: 180mm x 120mm
  • Temperature range from -20°C to +70°C
  • Input voltage: 24V DC


The ICnova ADB4000 and appropriate ICnova CPU-Modules can be ordered at our Shop


Suitable CPU Modules

Software

All Modules provided by In-Circuit usally have a Buildroot based system preinstalled, so they can be used out of the box.
Login as "root" for which no password is set.

If you are new to kernel building please refer to First Steps with Buildroot.

The Board support packages listed in table above contain all sources required to build the linux image for the different combinations with the ICnova ADB4000.
If an older version of the BSP is needed please look at our Downloads section.

Generally the bootloaders on our modules are configured to loook for a bootable linux image on the SD-Card and only boot from flash if none is found.

For some configuration a suitable Android-Image is provided, too. Apps can easily be copied to a micro-SD card and inserted into the SD-Card slot of the ADB4000. The system copies the application automatically into its system folder and it can be started immediately.


Downloads

Datasheet ICnova ADB4000

Schematic ICnova ADB4000

Flyer ICnova ADB4000

Personal tools