Difference between revisions of "Main Page"

Revision as of 17:56, 17 February 2014 (view source) Raik (Talk | contribs) ← Older edit		Latest revision as of 12:52, 29 July 2023 (view source) Traeger (Talk | contribs) (→‎Welcome to the In-Circuit Wiki)
(311 intermediate revisions by 6 users not shown)
Line 1:		Line 1:
−	<!-- -->	+	[[File:IC_banner.gif|center|link=http://www.in-circuit.de/]]
−	__NOTOC__	+
	== Welcome to the In-Circuit Wiki ==		== Welcome to the In-Circuit Wiki ==
		+	<div style="float:left;margin-right:40px;">__TOC__</div>
		+	<div>
		+	The [https://www.in-circuit.de In-Circuit GmbH] provides development and manufacturing services of electronics in the following fields:
		+	*Radio applications with radio-modules, antenna-designs, ultra-low-power designs for Battery-powered applications or energy harvesting solutions
		+	*Compact and energy-efficient embedded PC modules based on AVR32, ARM and CORTEX architectures
		+	*Highly complex FPGA- and Processor-designs
		+	*Microcontroller solutions with AVR, PIC, PSoC, STM...
−	[[File:IC_banner.gif |frame|center| right |link=http://shop.in-circuit.de/pages/2/Home ]]
		+	Here different pages can be found, which describe all products that can be ordered at our [https://in-circuit.de/shop online-shop].
		+	We intend to expand these resources continuously. So if any questions arise, which are not yet answered here, please write us an [mailto:office@in-circuit.de E-mail].
−	The [http://shop.in-circuit.de/pages/2/Home In-Circuit GmbH] provides development and manufacturing services of electronics in the following fields:	+	To help you by looking for articles regarding to your product, we have grouped them into individual categories you can find in the sections below.
		+	</div>
		+	<br style="clear:both;" />
−	*Highly complex FPGA- and Processor-designs	+	== [[radino Modules]] ==
−	*Microcontroller solutions with AVR, PIC and PSoC	+	[[File:radinoL4_Pinout_allgemein.jpg|500px|top]]
−	*Compact and energy-efficient embedded PC modules based on AVR32, ARM and CORTEX architectures	+	<span style="width:50px;display:inline-block;"></span>
−	*Radio applications with radio-modules, antenna-designs, ultra-low-power designs for Battery-powered applications or energy harvesting solutions	+	[[File:radino 32 WiFi Pinout.jpg|500px|top]]
		+	<span style="width:50px;display:inline-block;"></span>
		+	[[File:radino_Pinout_allgemein.jpg|500px|top]]
−	Here different pages can be found, which describe all products that can be ordered at our [http://shop.in-circuit.de/pages/2/Home online-shop].
−	We intend to expand these resources continuously. So if any questions arise, which are not yet answered here, you can write us an [mailto:office@in-circuit.de E-mail].
−	To help you by looking for articles regarding to your product, we have grouped them into individual categories you can find in the sections below.	+	The radino series combine a microcontroller with a RF transceiver in a small form factor EMC-compliant module.
		+	* The radino based on a Atmel ATmega32U4 (same as Arduino Leonardo and Arduino Micro)
		+	* The radino32 based on a STMicroelectronics STM32L1
		+	* The radinoL4 based on a STMicroelectronics STM32L4
		+	<br/>
		+	Visit [[radino/radino32 software]] for more information about the Arduino IDE with our radinos.<br/>
		+	We offer a continuously growing Arduino Lib with Drivers, Libs and Examples for our radino Modules: [[radino Library]]<br/>
		+	<br/>
		+	Here is an overview to our radino product family and suitable development boards.
		+	{| class="wikitable"
		+	! Board !! Pictures !! Description
		+	|-
		+	|[[radino40 DW1000]]
		+	|[[File:radino40 DW1000 45 1000 logo.jpg|200px|left|link=radino40 DW1000]] [[File:radino40 DW1000 back 1000.jpg|170px|link=radino40 DW1000]]
		+	|style="text-align:left;width:30em"|  for Ranging and RTLS, Ultra Wideband (UWB), IEEE802.15.4-2011 compliant, 3.5-6.5GHz, 37 GPIOS, USB, I²C, QSPI, SPI, UART, NFC-A, Bluetooth 5 / Bluetooth Low Energy
		+	|-
		+	|[[radinoL4 DW1000]]
		+	|[[File:radinoL4_DW1000_45_logo_640.jpg|200px|left|link=radinoL4 DW1000]]
		+	|style="text-align:left;width:30em"|  for Ranging and RTLS, Ultra Wideband (UWB), IEEE802.15.4-2011 compliant, 3.5-6.5GHz, 23 GPIOS, I²C, SPI, 2xUART, USB
		+	|-
		+	|[[radino32 DW1000]]
		+	|[[File:radino32_45_DW1000_logo_640.jpg|200px|left|link=radino32 DW1000]]  [[File:radino32_DW1000_bot_640.jpg|170px|link=radino32 DW1000]]
		+	|style="text-align:left;width:30em"|  for Ranging and RTLS, Ultra Wideband (UWB), IEEE802.15.4-2011 compliant, 3.5-6.5GHz, 23 GPIOS, I²C, SPI, 2xUART, USB
		+	|-
		+	|[[radino32 WiFi]]
		+	|[[File:radino32 45 wifi logo 640.jpg|200px|left|link=radino32 WiFi]]  [[File:radino32_bot_wifi.jpg|170px|link=radino32 WiFi]]
		+	|style="text-align:left;width:30em"| 802.11 b/g/n, integrated TCP/IP protocol stack, 23 GPIOS, I²C, SPI, 2xUART, USB
		+	|-
		+	|[[radino32 nRF8001]]
		+	|[[File:radino32 45 nrf8001 logo 640.jpg |200px|left|link=radino32 nRF8001]]  [[File:radino32_bot_nRF8001.jpg|170px|link=radino32 nRF8001]]
		+	|style="text-align:left;width:30em"| Bluetooth v4.0 compliant, 23 GPIOS, I²C, SPI, 2xUART, USB
		+	|-
		+	|[[radino32 CC1101]]
		+	|[[File:radino32 45 cc1101-868 640 logo.jpg|200px|left|link=radino32 CC1101]]  [[File:radino32_bot_CC1101.jpg|170px|link=radino32 CC1101]]
		+	|style="text-align:left;width:30em"| integrated CC1101 HF frontend for 433-925MHz, 23 GPIOS, I²C, SPI, 2xUART, USB
		+	|-
		+	|[[radino32 SX1272]]
		+	|[[File:radino32-SX1272 45 1000 logo fertig.jpg|200px|left|link=radino32 SX1272]]  [[File:radino32-SX1272 BOT 1000.JPG|170px|link=radino32 SX1272]]
		+	|style="text-align:left;width:30em"| long range transmission up to 30 km, 23 GPIOS, I²C, SPI, 2xUART, USB
		+	|-
		+	|[[radino WiFi]]
		+	|[[File:radino-wifi_45logo_640.jpg|200px|left|link=radino WiFi]]  [[File:radino_wifi_bot_640.jpg|150px|link=radino WiFi]][[File:arduin+wifi+radinowifi.jpg|200px|right|link=radino WiFi]]
		+	|style="text-align:left;width:30em"| 802.11 b/g/n, integrated TCP/IP protocol stack, 15 GPIOS, I²C, SPI, UART, USB HID
		+	|-
		+	|[[radino nRF8001]]
		+	|[[File:radino-nRF8001_45logo_640.jpg|200px|left|link=radino nRF8001]]  [[File:radino-nRF8001_bot_640.jpg|170px|link=radino nRF8001]]  [[File:arduinomicro+ble+radino_nRF8001.jpg|200px|right|link=radino nRF8001]]
		+	|style="text-align:left;width:30em"| Bluetooth v4.0 compliant, 15 GPIOS, I²C, SPI, UART, USB HID
		+	|-
		+	|[[radino CC1101]]
		+	|[[File:radinoCC1101433_45_640.jpg|200px|left|link=radino CC1101]]  [[File:radino_cc1101_back_640.jpg|200px|link=radino CC1101]] [[File:arduino+cc1101+radinocc1101.jpg|200px|right|link=radino CC1101]]
		+	|style="text-align:left;width:30em"| integrated CC1101 HF frontend for 433/868/915MHz, 15 GPIOS, I²C, SPI, UART, USB HID
		+	|-
		+	|[[radino RF69]]
		+	|[[File:radino-RF69-433_640.jpg|200px|left|link=radino RF69]][[File:radino-RF69_back_640.jpg|200px|link=radino RF69]]
		+	|style="text-align:left;width:30em"| integrated RF69 HF frontend for 433/868MHz, 15 GPIOS, I²C, SPI, UART, USB HID
		+	|-
		+	|[[radino RF233]]
		+	|[[File:radino-RF233_640.jpg|200px|left|link=radino RF233]][[File:radino-RF233_back_640.jpg|200px|link=radino RF233]]
		+	|style="text-align:left;width:30em"| integrated RF233 HF frontend for 2.4GHz, 15 GPIOS, I²C, SPI, UART, USB HID
		+	|-
		+	|[[radino Leonardo]]
		+	|[[File:leonardo_45.jpg|150px|left|link=radino Leonardo]][[File:Leonardo moduleinlegen.jpg|150px|link=radino Leonardo]]
		+	|style="text-align:left;width:30em"| Carrier board suitable for all radino modules. Includes Arduino connector for easy mounting of Arduino shields. Voltage regulator and Level-Shifters are also included.
		+	|-
		+	|[[radino Spider 2.4G]]
		+	[[radino Spider RP-SMA]]
		+	|[[File:radino-spider_top.jpg|x150px|left|link=radino Spider 2.4G]]
		+	[[File:radino-spider-rpsma_top.jpg|x150px|link=radino Spider RP-SMA]]
		+	|style="text-align:left;width:30em"| Breadboard adapter for all radino modules
		+	|-
		+	|[[radino USB Stick]]
		+	|[[File:radino-usb-stick_45.jpg|150px|left|link=radino USB Stick]]
		+	[[File:radino-usb-stick_enclosure.jpg|150px|link=radino USB Stick]]
		+	[[File:radino-usb-stick_top.jpg|120px|link=radino USB Stick]]
		+	[[File:radino-usb-stick_bot.jpg|120px|link=radino USB Stick]]
		+	|style="text-align:left;width:30em"| USB Stick for all radino modules. Available with integrated Chip-antennas and as a version with RP-SMA-connector.
		+	|-
		+	|[[radino40 DW1000 USB-Stick]]
		+	|[[File:radino40 dw1000 USB Stick enclosed 45 1000.jpg|150px|link=radino40 DW1000 USB-Stick]][[File:radino40 dw1000 USB Stick 45 1000.jpg|150px|left|link=radino Leonardo]]
		+	|style="text-align:left;width:30em"| USB-Stick radino40 DW1000 module, UWB-antenna, Bluetooth®-antenna, USB-A plug and 6-Pin TC2030 CTX Plug-of-Nails<sup>TM</sup> SWD connector for programming and debugging. For Ranging and RTLS, Ultra Wideband (UWB)
		+	|-
		+	|[[DW1000 USB-Stick]]
		+	|[[File:DW1000 Stick 45-2 1000.jpg|150px|link=radino USB Stick]][[File:DW1000 Sick LP 45 1000.jpg|150px|left|link=radino USB Stick]]
		+	|style="text-align:left;width:30em"| USB-Stick with radino32 DW1000 or radinoL4 DW1000, UWB-chip-antenna and USB-A Plug. For Ranging and RTLS, Ultra Wideband (UWB)
		+	|-
		+	|[[radino UART-Bridge]]
		+	|[[File:radino UART 45 640.jpg|x150px|left|link=radino UART-Bridge]]
		+	[[File:radino UART top 640.jpg|x150px|link=radino UART-Bridge]]
		+	[[File:radino UART bot 640.jpg|x150px|link=radino UART-Bridge]]
		+	|style="text-align:left;width:30em"| UART bridge with power supply and level shifters for all radino modules
		+	|-
		+	|[[radino RS485/RS232-Bridge IP65]]
		+	|[[File:RS485+RS232_45.JPG|x150px|left|link=radino RS485/RS232-Bridge IP65]]
		+	[[File:RS485+RS232_Anschluss.JPG|x150px|link=radino RS485/RS232-Bridge IP65]]
		+	|style="text-align:left;width:30em"| radino RS485-Bridge IP65 outdoor radio adapter for Modbus, Art-Net etc. Includes RS485 driver, RS232 driver, IP65 enclosure.
		+	|-
		+	|[[XBee-PRO Shield]]
		+	|[[File:xbee_cc1101_45_1000.JPG|x120px|left|link=XBee-PRO Shield]]
		+	[[File:xbee_bot_45_1000.JPG|x120px|link=XBee-PRO Shield]]
		+	[[File:xbee_RPSMA_1000.JPG|x120px|link=XBee-PRO Shield]]
		+	|style="text-align:left;width:30em"| XBee Pro adapter for all radino modules
		+	|-
		+	|[[radino DinRail Adapter]]
		+	|[[File:radino-dinrail_top_45_housing.jpg|150px|left|link=radino DinRail Adapter]]
		+	|style="text-align:left;width:30em"| DinRail Adapter connects our RS485 DinRail Bus System to radino modules
		+	|-
−	== [[:Category:ICnova CPU-Modules| ICnova CPU-Modules]] ==	+	|}
		+	<br/>
−	*[[:Category:ICnova iMX536|ICnova iMX536]] - working with iMX536 modules	+	== [[radino/radino32 based products]] ==
−	*[[:Category:ICnova SAM9G45|ICnova SAM9G45]]  - working with SAM9G45 / SAM9M10 modules	+
−	[[File:CPU-Module.jpg  |thumb|x200px | right|link=:Category:ICnova CPU-Modules| ICnova CPU-Modules| [[:Category:ICnova CPU-Modules| ICnova CPU-Modules]]]]	+	These products are based at our radino, radino32 and radinoL4 series.
		+	{| class="wikitable"
		+	! Module !! Pictures !! Description
−	'''AVR 32 AP7000 Modules'''	+	|-
−		+	|[[DW1000 Anchor]]
−	*[[ICnova AP7000 OEM]]	+	|[[File:DW1000_Anchor_45cable_1000.jpg|150px|left|link=DW1000 Anchor]]
−	*[[ICnova AP7000 OEMplus]]	+	|style="text-align:left;width:30em"| Anchor for Ranging / RTLS applications with radino32 DW1000 Ultra Wide Band module.
−	*[[ICnova AP7000 Base]]	+
−	'''ARM modules'''	+	|-
		+	|[[DW1000 Tag]]
		+	|[[File:DW1000_Tag_offenGehäuse_1000.jpg|150px|left|link=DW1000 Tag]]
		+	|style="text-align:left;width:30em"| Tag for Ranging / RTLS applications with radino32 DW1000 Ultra Wide Band module.
−	*[[ICnova SAM9G45 SODIMM]]	+	|-
−	*[[ICnova i.MX353 OEM]]	+	|[[DW1000 Tag IP65]]
−	*[[ICnova SAM9G45 OEM]]	+	|[[File:enclosure_45.jpg|150px|left|link=DW1000 Tag IP65]]
−	*[[ICnova SAM9G45+XC3S700AN OEM]]	+	|style="text-align:left;width:30em"| Tag for Ranging / RTLS applications with radino32 DW1000 Ultra Wide Band module in an IP65 enclosure.
−	'''CORTEX modules'''	+	|-
		+	|[[DW1000 USB-Stick]]
		+	|[[File:45_web.jpg|150px|left|link=DW1000 USB-Stick]]
		+	|style="text-align:left;width:30em"| Compact USB-Stick with DW1000 and UWB antenna for Ranging / RTLS applications.
−	*[[ICnova i.MX535 SODIMM]]	+	|-
−	*[[ICnova i.MX536 SODIMM]]	+	|[[radino RFID]]
		+	|[[File:radino_RFID-Reader_45_1000.jpg|150px|left|link=radino RFID]]
		+	|style="text-align:left;width:30em"| RIFD reader for 13.56 MHz based on the In-Circuit radino-series.
−	'''FPGA modules'''	+	|-
		+	|[[radino IP65-Radar]]
		+	|[[File:radino_radar_45_1000.jpg|150px|left|link=radino IP65-Radar]]
		+	|style="text-align:left;width:30em"| Free programmable radar sensor module for relative speed measurement and motion detection with the RSM-1650 radar sensor.
−	*[[ICnova SAM9G45+XC3S700AN OEM]]	+	|}
		+	<br/>
−	== [[:Category:Application Development Boards| Application Development Boards]] ==	+	== [[Avionics]] ==
		+	We offer several products that improve your in-flight experience.
−	[[File:ADB4001.jpg  |right |x120px | thumb|link=ICnova ADB4001| |[[ICnova ADB4001]]]]	+	<div style="clear:right;"></div>
−	<div class="tright" style="clear:none">[[File:ICnova ADB3000.jpg|thumb|none|x120px |link=ICnova ADB3000||[[ICnova ADB3000]]]]</div>	+
−	<div class="tright" style="clear:none">[[File:STK ADB4000 8inch + ICnova SAM9G45 SODIMM.jpeg|thumb|none|x120px||link=ICnova ADB4000|[[ICnova ADB4000]]]]</div>	+
		+	{| class="wikitable"
		+	!Module
		+	!Picture
		+	!Description
		+	!Main features
		+	!Notes
−	*[[ICnova ADB1000]] - works with [[ICnova AP7000 OEM]], [[ICnova AP7000 OEMplus]], [[ICnova i.MX353 OEM]] and [[ICnova SAM9G45 OEM]]	+	|-
−	*[[ICnova ADB1001]] - works with [[ICnova AP7000 OEM]] and [[ICnova AP7000 OEMplus]]	+	|[[ICflyAHRSII]]
−	*[[ICnova ADB1002]] - works with [[ICnova AP7000 OEM]], [[ICnova AP7000 OEMplus]], [[ICnova i.MX353 OEM]] and [[ICnova SAM9G45 OEM]]	+	|[[File:ICflyII_P_45_1000.JPG|150px|right|link=ICflyAHRSII]]
−	*[[ICnova ADB1003]] - works with [[ICnova AP7000 OEM]], [[ICnova AP7000 OEMplus]], [[ICnova i.MX353 OEM]] and [[ICnova SAM9G45 OEM]]	+	|Altitude Heading Reference System<br/>Provides an artificial horizon
−	*[[ICnova ADB1004]] - works with [[ICnova AP7000 OEM]], [[ICnova AP7000 OEMplus]], [[ICnova i.MX353 OEM]] and [[ICnova SAM9G45 OEM]]	+	|Roll, Pitch, Magnetic Heading, Altitude, Airspeed, ...
−	*[[ICnova ADB3000]] - optimzed for [[ICnova SAM9G45+XC3S700AN OEM]] but also works with [[ICnova AP7000 OEM]], [[ICnova AP7000 OEMplus]], [[ICnova i.MX353 OEM]] and [[ICnova SAM9G45 OEM]]	+	|Receive Orientation data on your mobile device using a compatible mobile App:<br/>ICfly Instrument, Sky-Map, SkyNavigation Pro, ...
−	*[[ICnova ADB4000]] - works with [[ICnova SAM9G45 SODIMM]]	+
−	*[[ICnova ADB4001]] - works with [[ICnova i.MX535 SODIMM]] and [[ICnova i.MX536 SODIMM]]	+
		+	|-
		+	|[[ICflyDisplay]]
		+	|[[File:ICflyDisplay_Front_Horizont_1000.jpg|150px|right|link=ICflyDisplay]]
		+	|Shows artificial horizon, engine data<br/>or traffic information
		+	|Transflective display, Integrated Touchscreen
		+	|Artifical horizon requires [[ICflyAHRSII]]<br/>Engine data requires [[ICflyMotorbox 912]]
		+	|-
		+	|[[ICflyMotorbox 912]]
		+	|[[File:ICflyMotorbox_45.jpg|150px|right|link=ICflyMotorbox 912]]
		+	|Provides engine data for [[ICflyAHRSII]]<br/>and [[ICflyDisplay]]
		+	|Power supply for ICflyBus<br/>Provides engine data for [[ICflyAHRSII]]
		+	|
		+	|-
		+	|[[ICfly-TRX1500-Adapter]]
		+	|[[File:ICfly-TRX1500-Adapter_1.jpg|150px|right|link=ICfly-TRX1500-Adapter]]
		+	|Connects your TRX-1500 Traffic Sensor<br/>with the ICfly Bus.
		+	|
		+	|
−	== [[:Category:ICradio ZWIR Modules|ICradio radio Modules]] ==	+	|-
		+	|}
−	[[File:Funkmodule.jpg  |x120px | thumb | right | link=:Category:ICradio ZWIR Modules | [[:Category:ICradio ZWIR Modules | ICradio ZWIR Modules]]]]	+	<br/>
−	<div class="tright" style="clear:none">[[File:ZWIR4512.jpg | thumb | none | x120px | link=ICradio-ZWIR4512-OEM | [[ICradio-ZWIR4512-OEM]]]]</div>	+
−	<div class="tright" style="clear:none">[[File:ADB2001.jpg | thumb | none | x120px | link=ADB2001 | [[ADB2001]]]]</div>	+
		+	== [[ICnova CPU-Modules]] ==
		+	Basicly all our ICnova modules feature
		+	*10/100MBit Ethernet PHY
		+	*USB Host
		+	*USB Device
		+	*SDC
		+	*TFT/Touch Display connections
		+	*multiple UARTS and GPIOS
		+	Important additions or restrictions are listed in the the following tables.
		+	* For detailed listings consult the modules individual pages
		+	* For the board support packages consult the [[Downloads]] page
−	*[[ICradio-ZWIR4512-OEM]]	+	<div style="clear:right;"></div>
−	*[[ICradio-ZWIR4512-Plug]]	+
−	*[[ICradio-ZWIR4512-Stick]]	+
−	*[[ADB2001|ICnova ADB2001]] - Application Development Board for ICradio-ZWIR4512-OEM modules	+
−	*[[:Category:ICradio AVR Modules|ICradio AVR Modules]] - hints about the older ICradio Modules based on an Atmel AVR MCU	+
−	*[[:Category:ICradio ZWIR Modules|ICradio ZWIR Modules]] - some hints about newer ICradio Modules, kits, bundles, protocols based on the ZWIR Chipset	+
		+	{| class="wikitable"
		+	!Module
		+	!Picture
		+	!Description
		+	!Main features
		+	!Notes
		+	|-
		+	|[[ICnova A20 SODIMM]]
		+	|[[File:ICnova_A20_SODIMM_45.jpg|150px|left|link=ICnova A20 SODIMM]][[File:sompi_logo.jpg|150px|right|link=ICnova A20 SODIMM]]
		+	|ARM Dual CORTEX-A7, 1GHz<br/>
		+	|Ethernet, LVDS, HDMI, SATA, 6xUART
		+	|
		+	|-
		+	|[[ICnova SAM9G45 SODIMM]]
		+	|[[File:Icnova_sam9g45_sodimm.jpg|150px|left|link=ICnova SAM9G45 SODIMM]]
		+	|Atmel ARM9 AT91SAM9G45, 400MHz<br/>
		+	|
		+	|
		+	|-
		+	|[[ICnova SAM9G45 OEM]]
		+	|[[File:Icnova_sam9g45_oem.jpg|150px|left|link=ICnova SAM9G45 OEM]]
		+	|Atmel ARM9 AT91SAM9G45, 400MHz<br/>
		+	|
		+	|
−	== [[:Category:DIN Rail Modules| DIN Rail Modules]] ==	+	|-
		+	|[[ICnova i.MX353 OEM]]
		+	|[[File:ICnova_i.MX353_OEM.jpeg|150px|left|link=ICnova i.MX353 OEM]]
		+	|Freescale i.MX353 ARM11, 533MHz<br/>
		+	|
		+	|
−	<div class="tright" style="clear:none">[[File:DIN_Rail_CPU_61.jpg  |120px | thumb | right | link=DIN Rail CPU 61| [[DIN Rail CPU 61]]]]</div>	+	|-
−	<div class="tright" style="clear:none">[[File:DIN_Rail_CPU_60.jpg  |120px | thumb | right | link=DIN Rail CPU 60| [[DIN Rail CPU 60]]]]</div>	+	|}
−	<div class="tright" style="clear:none">[[File:DIN Rail CPU 10.jpg |120px | thumb | right | link=DIN Rail CPU 10| [[DIN Rail CPU 10]]]]</div>	+
		+	For information about legacy modules please consult [[Legacy products#ICnova CPU-Modules|legacy products]].
−	*[[DIN Rail CPU 10]]
−	*[[DIN Rail CPU 60]]	+	== [[Application Development Boards]] ==
		+	Most of our ADBs feature
		+	* 1x 10/100MBit Ethernet
		+	* USB host connector
		+	* USB device connector
		+	* µSDC slot
		+	<div style="clear:right;"></div>
−	*[[DIN Rail CPU 61]]	+	{| class="wikitable"
		+	|-
		+	!ADB
		+	!Picture
		+	!Supply voltage
		+	!Main features
		+	!Notes
−	*[[DIN Rail Relais 6I6S]]	+	|-
		+	|[[ICnova ADB4006]]
		+	|[[File:ICnova_ADB4006.jpg|150px|left|link=ICnova ADB4006]]
		+	|5V DC
		+	|HDMI connector, Ethernet, SATA interface, Analog audio input/output, Breadboard compatible
		+	for ICnova A20 SODIMM, A20 SoC compute module
		+	|
−	*[[DIN Rail ADDA 6I4O]]	+	|-
		+	|[[ICnova ADB4004]]
		+	|[[File:ICnova_ADB4004.jpeg|150px|left|link=ICnova ADB4004]]
		+	|12-24V DC
		+	|TFT-Touchscreen connector, RS485, RS422, RS232, I2C, RTC, Buzzer, GPIO pin headers
		+	for ICnova SAM9G45 SODIMM
		+	|
−	*[[DIN Rail LED-Dimmer]]	+	|-
		+	|[[ICnova ADB1000]]
		+	|[[File:ICnova ADB1000.jpg|150px|left|link=ICnova ADB1000]]
		+	|10-36V DC
		+	|TFT Touchscreen connector, 2x RS485, RTC, I2C, Buzzer
		+	for all ICnova CPU modules with OEM-shape (ICnova SAM9G45 OEM, ICnova iMX353 OEM...)
		+	|
−	*[[DIN Rail PWM-Driver]]	+	|-
		+	|[[ICnova ADB1004]]
		+	|[[File:ICnova ADB1004.jpg|150px|left|link=ICnova ADB1004]]
		+	|
		+	|for all ICnova CPU modules with OEM-shape (ICnova SAM9G45 OEM, ICnova iMX353 OEM...)
		+	|development halted
−	<!--	+	|}
−	-->	+
		+	For information about legacy boards please consult [[Legacy products#Application Development Boards|legacy products]].
		+	== [[DIY / open source]] ==
		+	Our DIY / open source projects are exemplary applications for our [[radino Modules]].
−	== [[:Category:µC Modules| µC Modules]] ==	+	{| class="wikitable"
		+	! Project !! Pictures !! Description !! Notes
		+	|-
		+	|[[Open Source Blinds Controller]]
		+	|[[File:radino-WiFi_DIY-Blindscontroller.jpg|200px|left|link=Open Source Blinds Controller]][[File:radinoDIY_BlindsController_oragne-offen.jpg|150px|link=Open Source Blinds Controller]]
		+	|style="text-align:left;width:30em"| Open Source Blinds Controller:<br />radio controller for blinds, garage doors, window openers...<br />
		+	|style="text-align:left;width:10em"|
		+	|-
		+	|}
−	[[File:Icswift sam7.jpg |x120px | thumb | right |link=:Category:ICswift|[[:Category:ICswift|ICswift]]]]
−	<!--	+	== [[DIN Rail Modules]] ==
−	<div class="tright" style="clear:none">[[File:xxx.jpg|thumb|none|x120px|[[xxx]]]]</div>	+
−	<div class="tright" style="clear:none">[[File:xxx.jpg|thumb|none|x120px|[[xxx]]]]</div>	+
−	-->	+
		+	All our rail modules are connectable with BUS connectors.<br/>
		+	Over this bus, the modules share a 24V power supply and are connected via RS485.<br/>
		+	On the RS485 connection the [[DIN Rail BUS Protocol]] can be used for communication.
		+	{| class="wikitable"
		+	|-
		+	!Module
		+	!Picture
		+	!Width
		+	!CPU/MCU
		+	!Features
−	*[[:Category:ICswift|ICswift]] - some documentation and help for the ICswift SAM7	+	|-
		+	|[[DIN Rail CPU 10]]
		+	|[[File:DIN Rail CPU 10.jpg|150px|left|link=DIN Rail CPU 10]]
		+	|1TE
		+	|[[ICnova SAM9G45 OEM]]
		+	|ARM9@400MHz, 256MB NAND-Flash, Linux BSP, Ethernet, RS485
		+	|-
		+	|[[radino DinRail 6S2I]]
		+	|[[File:HS6S2I_45_1000.jpg|150px|left|link=radino DinRail 6S2I]]
		+	|1TE
		+	|radino32 WiFi preinstalled
		+	|6x Relays output, 2x Digital input
		+	|-
		+	|[[radino DinRail Adapter]]
		+	|[[File:radino-dinrail_top_45_housing.jpg|150px|left|link=radino DinRail Adapter]]
		+	|1TE
		+	|suitable for
		+	all radino modules
		+	|DinRail Adapter to connect any radino Modules
		+	|-
		+	|[[DIN Rail BUS Extender]]
		+	|[[File:DIN Rail BUS Extender.png|150px|left|link=DIN Rail BUS Extender]]
		+	|1TE
		+	|
		+	|Connect separate rails
		+	|-
		+	|[[DIN Rail BUS Auskoppler]]
		+	|[[File:DIN Rail BUS Auskoppler.jpg|150px|left|link=DIN Rail BUS Auskoppler]]
		+	|1TE
		+	|
		+	|External connectors for 24V supply and RS485
		+	|-
		+	|}
		+	For information about legacy boards please consult [[Legacy products#DIN Rail Modules|legacy products]].
		+	<br/>
		+	== [[Programmer]] ==
		+	<div class="tright" style="clear:none">[[File:Wiggler.jpeg  |120px | thumb | right |link=Programmer#Wiggler| Wiggler]]</div>
		+	<div class="tright" style="clear:none">[[File:ICprog-AVR2.0 KANDA.jpeg |120px | thumb | right |link=Programmer#ICprog-AVR2.0 / KANDA | ICprog-AVR2.0 / KANDA]]</div>
		+	<div class="tright" style="clear:none">[[File:ICprog OpenOCD.jpeg |120px | thumb | right |link=Programmer#ICprog_OpenOCD| ICprog OpenOCD]]</div>
−	== [[:Category:Programmer| Programmer]] ==	+	*[[Programmer#ICprog_OpenOCD | ICprog OpenOCD]]
		+	*[[Programmer#ICprog-AVR2.0 / KANDA | ICprog-AVR2.0 / KANDA]]
−	<div class="tright" style="clear:none">[[File:Wiggler.jpeg  |120px | thumb | right |link=Wiggler|[[Wiggler]]]]</div>	+	*[[Programmer#Wiggler | Wiggler]]
−	<div class="tright" style="clear:none">[[File:ICprog-AVR2.0 KANDA.jpeg |120px | thumb | right |link=ICprog-AVR2.0 / KANDA | [[ICprog-AVR2.0 / KANDA]]]]</div>	+
−	<div class="tright" style="clear:none">[[File:ICprog OpenOCD.jpeg |120px | thumb | right |link=ICprog OpenOCD| [[ICprog OpenOCD]]]]</div>	+
−	*[[ICprog OpenOCD]]	+	<div style="clear:both"></div>
−	*[[ICprog-AVR2.0 / KANDA]]	+	== [[Interface Modules]] ==
−	*[[Wiggler]]	+	<div class="right" style="clear:none">[[File:USB-UART-Brdige_ISO_45_640.jpg  |120px | thumb | right |link=Interface Modules#USB UART Bridge ISO | USB UART Bridge ISO]]</div>
		+	<div class="tright" style="clear:none">[[File:USB-B UART Bridge.jpeg |120px | thumb | right |link=Interface Modules#USB-B UART Bridge CP2102 | USB-B UART Bridge CP2102]]</div>
		+	<div class="tright" style="clear:none">[[File:USB-A UART Bridge.jpeg |120px | thumb | right |link=Interface Modules#USB-A UART Bridge CP2102 | USB-A UART Bridge CP2102]]</div>
		+	<div class="tright" style="clear:none">[[File:CP2104_45.jpg  |120px | thumb | right | link=Interface Modules#USB-A UART Bridge CP2104 | USB-A UART Bridge CP2104]]</div>
−	<!--	+	<div class="right" style="clear:none">[[File:RS232-DCE-Bridge_45.jpg  |120px | thumb | right |link=Interface_Modules#RS232(DCE)-UART-Bridge | RS232(DCE)-UART-Bridge]]</div>
−	*[[usbprog V3.0]]	+	<div class="tright" style="clear:none">[[File:RS232-DTE-Bridge_45.jpg  |120px | thumb | right |link=Interface_Modules#RS232(DTE)-UART-Bridge | RS232(DTE)-UART-Bridge]]</div>
		+	<div class="tright" style="clear:none">[[File:USB-B-RS232_Bridge_45.jpg  |120px | thumb | right |link=Interface_Modules#USB-B-RS232_Bridge | USB-B-RS232 Bridge]]</div>
		+	<div class="tright" style="clear:none">[[File:USB-RS485-Bridge.jpeg  |120px | thumb | right |link=Interface Modules#USB-RS485-Bridge | USB-RS485-Bridge]]</div>
−	-->	+	*[[Interface Modules#USB-A UART Bridge CP2104|USB-A UART Bridge CP2104]]
		+	*[[Interface Modules#USB-A UART Bridge CP2102|USB-A UART Bridge CP2102]]
		+	*[[Interface Modules#USB-B UART Bridge CP2102|USB-B UART Bridge CP2102]]
		+	*[[Interface Modules#USB UART Bridge ISO|USB UART Bridge ISO]]
		+	*[[Interface Modules#USB-RS485-Bridge|USB-RS485-Bridge]]
		+	*[[Interface Modules#USB-B-RS232_Bridge|USB-B-RS232 Bridge]]
		+	*[[Interface Modules#RS232(DTE)-UART-Bridge|RS232(DTE)-UART-Bridge]]
		+	*[[Interface Modules#RS232(DCE)-UART-Bridge|RS232(DCE)-UART-Bridge]]
−	== [[Interface Modules]] ==	+	<div style="clear:both"></div>
		+	== [[Microcontroller Modules]] ==
−	<div class="tright" style="clear:none">[[File:USB-RS485-Bridge.jpeg  |120px | thumb | right |link=Interface Modules|USB-RS485-Bridge]]</div>	+	<div class="right" style="clear:none">[[File:DILAT90USB646_45.jpg |120px | thumb | right |DIL-AT90USB646 | link=Microcontroller Modules#DIL-AT90USB646]]</div>
−	<div class="tright" style="clear:none">[[File:USB-B UART Bridge.jpeg |120px | thumb | right |link=Interface Modules|USB-B UART Bridge]]</div>	+	<div class="tright" style="clear:none">[[File:DILAT90USB162_45.jpg |120px | thumb | right |DIL-AT90USB162 | link=Microcontroller Modules#DIL-AT90USB162]]</div>
−	<div class="tright" style="clear:none">[[File:USB-A UART Bridge.jpeg |120px | thumb | right |link=Interface Modules|USB-A UART Bridge]]</div>	+	<div class="tright" style="clear:none">[[File:Micro32U4_45_350x340.jpg |120px | thumb | right |Micro32u4 Evalboard | link=Microcontroller Modules#Micro32u4 Evalboard]]</div>
		+	<div class="tright" style="clear:none">[[File:Icswift_sam7.jpg |120px | thumb | right |ICswift SAM7X128/256/512 | link=Microcontroller Modules#ICswift SAM7X128/256/512]]</div>
		+	<div class="right" style="clear:none">[[File:Centipede_45_640.jpg |120px | thumb | right |ATxmega128A1U Centipede | link=Microcontroller Modules#ATxmega128A1U Centipede]]</div>
		+	<div class="tright" style="clear:none">[[File:DIL-UC3A-Evalboard_45.jpeg |120px | thumb | right |Atmel UC3A Evaluation board | link=Microcontroller Modules#Atmel UC3A Evaluation board]]</div>
		+	<div class="tright" style="clear:none">[[File:DIL-CY8C3666AXI-052_45.jpg |120px | thumb | right |DIL-CY8C3666AXI-052 | link=Microcontroller Modules#DIL-CY8C3666AXI-052]]</div>
		+	<div class="tright" style="clear:none">[[File:DILAT90USB646_45.jpg |120px | thumb | right |DIL-AT90USB1287 | link=Microcontroller Modules#DIL-AT90USB1287]]</div>
−	*[[Interface Modules|USB-A UART Bridge]] <!--[http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx CP201x Driver]-->	+	*[[Microcontroller Modules#ICswift SAM7X128/256/512|ICswift SAM7X128/256/512]]
−	*[[Interface Modules|USB-B UART Bridge]] <!--[http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx CP201x Driver]-->	+	*[[Microcontroller Modules#Micro32u4 Evalboard|Micro32u4 Evalboard]]
−	*[[Interface Modules|USB-RS485-Bridge]] <!--[http://www.ftdichip.com/Drivers/VCP.htm FTDI Driver]-->	+	*[[Microcontroller Modules#DIL-AT90USB162|DIL-AT90USB162]]
		+	*[[Microcontroller Modules#DIL-AT90USB646|DIL-AT90USB646]]
		+	*[[Microcontroller Modules#DIL-AT90USB1287|DIL-AT90USB1287]]
		+	*[[Microcontroller Modules#DIL-CY8C3666AXI-052|DIL-CY8C3666AXI-052]]
		+	*[[Microcontroller Modules#Atmel UC3A Evaluation board|Atmel UC3A Evaluation board]]
		+	*[[Microcontroller Modules#ATxmega128A1U Centipede|ATxmega128A1U Centipede]]
		+	<div style="clear:both"></div>
		+	== Other Products ==
−	== [[:Category:HowTo| HowTo]] ==	+	<div class="tright" style="clear:none">[[File:ESP-ADC-SMD_45.jpg |120px | thumb | right |ESP-ADC SMD | link=ESP8266EX#ESP-ADC SMD]]</div>
		+	<div class="tright" style="clear:none">[[File:ESP_DIL_45.jpg |120px | thumb | right |ESP-ADC DIL18 | link=ESP8266EX#ESP-ADC DIL18 development board]]</div>
		+	<div class="tright" style="clear:none">[[File:ACDC-1.2_Printmodul.jpg |120px | thumb | right |ACDC 1.2 Printmodule | link=ACDC 1.2 Printmodule]]</div>
		+	<div class="tright" style="clear:none">[[File:ICstep01_45_350x340.jpg |120px | thumb | right |ICstep01 | link=ICstep01]]</div>
		+	*[[ICstep01|ICstep01]]
		+	*[[ACDC 1.2 Printmodule|ACDC 1.2 Printmodule]]
		+	*[[ESP8266EX#ESP-ADC DIL18 development board|ESP-ADC DIL18 development board]]
		+	*[[ESP8266EX#ESP-ADC SMD|ESP-ADC SMD]]
		+
		+
		+	<div style="clear:both"></div>
		+
		+	== Production ==
		+
		+	<div class="tright" style="clear:none">
		+	[[File:Entwicklung_03_450x300.jpg|x200px|top|link=http://www.in-circuit.de/entwicklung.html]]
		+	<span style="width:20px;display:inline-block;"></span>
		+	[[File:FertigungLinieMy200_1000.jpg|x200px|top|link=http://www.in-circuit.de/fertigung.html]]
		+	</div>
		+
		+	[[Format_Maschinendaten|Format für Maschinendaten zur Lohnfertigung]]
		+
		+	[[machine_data_format|Machine data format for job order production]]
		+
		+
		+	<div style="clear:both"></div>
		+
		+	== [[:Category:HowTo| HowTo]] ==
	[[DIN Rail BUS Protocol| DIN Rail BUS Protocol]]		[[DIN Rail BUS Protocol| DIN Rail BUS Protocol]]
Line 214:		Line 535:
	[[Flashing a new ZWIR4512 Firmware]]		[[Flashing a new ZWIR4512 Firmware]]
−	[[Format für Maschinendaten zur Lohnfertigung]]
−	== [[:Category:Downloads|Downloads]] ==	+	== [[Downloads]] ==
	Any software can be found on the [[Downloads]] page		Any software can be found on the [[Downloads]] page
		+
		+
		+	== [[Legacy products]] ==
		+
		+	List of legacy products
		+
		+
		+	'''radino Modules:'''
		+	*[[radino Watch]]
		+
		+
		+	'''3D Printer'''
		+	*[[3Dino]]
		+
		+
		+	'''ICnova CPU-Modules:'''
		+	*[[ICnova AP7000 OEM]]
		+	*[[ICnova AP7000 OEMplus]]
		+	*[[ICnova AP7000 Base]]
		+	*[[ICnova SAM9G45+XC3S700AN OEM]]
		+	*[[ICnova SAMA5D36 SODIMM]]
		+	*[[ICnova i.MX535 SODIMM]]
		+	*[[ICnova i.MX536 SODIMM ]]
		+
		+
		+	'''Application Development Boards:'''
		+	*[[ICnova ADB1001]]
		+	*[[ICnova ADB1002]]
		+	*[[ICnova ADB1003]]
		+	*[[ICnova ADB4000]]
		+	*[[ICnova ADB4001]]
		+	*[[ICnova ADB4003]]
		+	*[[ICnova ADB3000]]
		+	*[[ADB1002 DVI]]
		+
		+
		+	'''DIN Rail Modules:'''
		+	*[[DIN Rail Radioadapter]]
		+	*[[DIN Rail CPU 61]]
		+	*[[DIN Rail CPU 60]]
		+	*[[DIN Rail Relais 6I6S]]
		+	*[[DIN Rail ADDA 6I4O]]
		+	*[[DIN Rail LED-Dimmer]]
		+	*[[DIN Rail PWM-Driver]]

---

Latest revision as of 12:52, 29 July 2023

[edit] Welcome to the In-Circuit Wiki

[edit] radino Modules

The radino series combine a microcontroller with a RF transceiver in a small form factor EMC-compliant module.

• The radino based on a Atmel ATmega32U4 (same as Arduino Leonardo and Arduino Micro)
• The radino32 based on a STMicroelectronics STM32L1
• The radinoL4 based on a STMicroelectronics STM32L4

Visit radino/radino32 software for more information about the Arduino IDE with our radinos.
We offer a continuously growing Arduino Lib with Drivers, Libs and Examples for our radino Modules: radino Library

Here is an overview to our radino product family and suitable development boards.

Board	Pictures	Description
radino40 DW1000		for Ranging and RTLS, Ultra Wideband (UWB), IEEE802.15.4-2011 compliant, 3.5-6.5GHz, 37 GPIOS, USB, I²C, QSPI, SPI, UART, NFC-A, Bluetooth 5 / Bluetooth Low Energy
radinoL4 DW1000		for Ranging and RTLS, Ultra Wideband (UWB), IEEE802.15.4-2011 compliant, 3.5-6.5GHz, 23 GPIOS, I²C, SPI, 2xUART, USB
radino32 DW1000		for Ranging and RTLS, Ultra Wideband (UWB), IEEE802.15.4-2011 compliant, 3.5-6.5GHz, 23 GPIOS, I²C, SPI, 2xUART, USB
radino32 WiFi		802.11 b/g/n, integrated TCP/IP protocol stack, 23 GPIOS, I²C, SPI, 2xUART, USB
radino32 nRF8001		Bluetooth v4.0 compliant, 23 GPIOS, I²C, SPI, 2xUART, USB
radino32 CC1101		integrated CC1101 HF frontend for 433-925MHz, 23 GPIOS, I²C, SPI, 2xUART, USB
radino32 SX1272		long range transmission up to 30 km, 23 GPIOS, I²C, SPI, 2xUART, USB
radino WiFi		802.11 b/g/n, integrated TCP/IP protocol stack, 15 GPIOS, I²C, SPI, UART, USB HID
radino nRF8001		Bluetooth v4.0 compliant, 15 GPIOS, I²C, SPI, UART, USB HID
radino CC1101		integrated CC1101 HF frontend for 433/868/915MHz, 15 GPIOS, I²C, SPI, UART, USB HID
radino RF69		integrated RF69 HF frontend for 433/868MHz, 15 GPIOS, I²C, SPI, UART, USB HID
radino RF233		integrated RF233 HF frontend for 2.4GHz, 15 GPIOS, I²C, SPI, UART, USB HID
radino Leonardo		Carrier board suitable for all radino modules. Includes Arduino connector for easy mounting of Arduino shields. Voltage regulator and Level-Shifters are also included.
radino Spider 2.4G radino Spider RP-SMA		Breadboard adapter for all radino modules
radino USB Stick		USB Stick for all radino modules. Available with integrated Chip-antennas and as a version with RP-SMA-connector.
radino40 DW1000 USB-Stick		USB-Stick radino40 DW1000 module, UWB-antenna, Bluetooth®-antenna, USB-A plug and 6-Pin TC2030 CTX Plug-of-NailsTM SWD connector for programming and debugging. For Ranging and RTLS, Ultra Wideband (UWB)
DW1000 USB-Stick		USB-Stick with radino32 DW1000 or radinoL4 DW1000, UWB-chip-antenna and USB-A Plug. For Ranging and RTLS, Ultra Wideband (UWB)
radino UART-Bridge		UART bridge with power supply and level shifters for all radino modules
radino RS485/RS232-Bridge IP65		radino RS485-Bridge IP65 outdoor radio adapter for Modbus, Art-Net etc. Includes RS485 driver, RS232 driver, IP65 enclosure.
XBee-PRO Shield		XBee Pro adapter for all radino modules
radino DinRail Adapter		DinRail Adapter connects our RS485 DinRail Bus System to radino modules

[edit] radino/radino32 based products

These products are based at our radino, radino32 and radinoL4 series.

Module	Pictures	Description
DW1000 Anchor		Anchor for Ranging / RTLS applications with radino32 DW1000 Ultra Wide Band module.
DW1000 Tag		Tag for Ranging / RTLS applications with radino32 DW1000 Ultra Wide Band module.
DW1000 Tag IP65		Tag for Ranging / RTLS applications with radino32 DW1000 Ultra Wide Band module in an IP65 enclosure.
DW1000 USB-Stick		Compact USB-Stick with DW1000 and UWB antenna for Ranging / RTLS applications.
radino RFID		RIFD reader for 13.56 MHz based on the In-Circuit radino-series.
radino IP65-Radar		Free programmable radar sensor module for relative speed measurement and motion detection with the RSM-1650 radar sensor.

[edit] Avionics

We offer several products that improve your in-flight experience.

Module	Picture	Description	Main features	Notes
ICflyAHRSII		Altitude Heading Reference System Provides an artificial horizon	Roll, Pitch, Magnetic Heading, Altitude, Airspeed, ...	Receive Orientation data on your mobile device using a compatible mobile App: ICfly Instrument, Sky-Map, SkyNavigation Pro, ...
ICflyDisplay		Shows artificial horizon, engine data or traffic information	Transflective display, Integrated Touchscreen	Artifical horizon requires ICflyAHRSII Engine data requires ICflyMotorbox 912
ICflyMotorbox 912		Provides engine data for ICflyAHRSII and ICflyDisplay	Power supply for ICflyBus Provides engine data for ICflyAHRSII
ICfly-TRX1500-Adapter		Connects your TRX-1500 Traffic Sensor with the ICfly Bus.

[edit] ICnova CPU-Modules

Basicly all our ICnova modules feature

• 10/100MBit Ethernet PHY
• USB Host
• USB Device
• SDC
• TFT/Touch Display connections
• multiple UARTS and GPIOS

Important additions or restrictions are listed in the the following tables.

• For detailed listings consult the modules individual pages
• For the board support packages consult the Downloads page

Module	Picture	Description	Main features	Notes
ICnova A20 SODIMM		ARM Dual CORTEX-A7, 1GHz	Ethernet, LVDS, HDMI, SATA, 6xUART
ICnova SAM9G45 SODIMM		Atmel ARM9 AT91SAM9G45, 400MHz
ICnova SAM9G45 OEM		Atmel ARM9 AT91SAM9G45, 400MHz
ICnova i.MX353 OEM		Freescale i.MX353 ARM11, 533MHz

For information about legacy modules please consult legacy products.

[edit] Application Development Boards

Most of our ADBs feature

• 1x 10/100MBit Ethernet
• USB host connector
• USB device connector
• µSDC slot

ADB	Picture	Supply voltage	Main features	Notes
ICnova ADB4006		5V DC	HDMI connector, Ethernet, SATA interface, Analog audio input/output, Breadboard compatible for ICnova A20 SODIMM, A20 SoC compute module
ICnova ADB4004		12-24V DC	TFT-Touchscreen connector, RS485, RS422, RS232, I2C, RTC, Buzzer, GPIO pin headers for ICnova SAM9G45 SODIMM
ICnova ADB1000		10-36V DC	TFT Touchscreen connector, 2x RS485, RTC, I2C, Buzzer for all ICnova CPU modules with OEM-shape (ICnova SAM9G45 OEM, ICnova iMX353 OEM...)
ICnova ADB1004			for all ICnova CPU modules with OEM-shape (ICnova SAM9G45 OEM, ICnova iMX353 OEM...)	development halted

For information about legacy boards please consult legacy products.

[edit] DIY / open source

Our DIY / open source projects are exemplary applications for our radino Modules.

Project	Pictures	Description	Notes
Open Source Blinds Controller		Open Source Blinds Controller: radio controller for blinds, garage doors, window openers...

[edit] DIN Rail Modules

All our rail modules are connectable with BUS connectors.
Over this bus, the modules share a 24V power supply and are connected via RS485.
On the RS485 connection the DIN Rail BUS Protocol can be used for communication.

Module	Picture	Width	CPU/MCU	Features
DIN Rail CPU 10		1TE	ICnova SAM9G45 OEM	ARM9@400MHz, 256MB NAND-Flash, Linux BSP, Ethernet, RS485
radino DinRail 6S2I		1TE	radino32 WiFi preinstalled	6x Relays output, 2x Digital input
radino DinRail Adapter		1TE	suitable for all radino modules	DinRail Adapter to connect any radino Modules
DIN Rail BUS Extender		1TE		Connect separate rails
DIN Rail BUS Auskoppler		1TE		External connectors for 24V supply and RS485

For information about legacy boards please consult legacy products.

[edit] Programmer

• ICprog OpenOCD

• ICprog-AVR2.0 / KANDA

• Wiggler

[edit] Interface Modules

• USB-A UART Bridge CP2104

• USB-A UART Bridge CP2102

• USB-B UART Bridge CP2102

• USB UART Bridge ISO

• USB-RS485-Bridge

• USB-B-RS232 Bridge

• RS232(DTE)-UART-Bridge

• RS232(DCE)-UART-Bridge

[edit] Microcontroller Modules

• ICswift SAM7X128/256/512

• Micro32u4 Evalboard

• DIL-AT90USB162

• DIL-AT90USB646

• DIL-AT90USB1287

• DIL-CY8C3666AXI-052

• Atmel UC3A Evaluation board

• ATxmega128A1U Centipede

[edit] Other Products

• ICstep01
• ACDC 1.2 Printmodule
• ESP-ADC DIL18 development board
• ESP-ADC SMD

[edit] Production

Format für Maschinendaten zur Lohnfertigung

Machine data format for job order production

[edit] HowTo

DIN Rail BUS Protocol

Android

Buildroot

Debugging for ARM

Filesystems

Memorymappings

Target Configuration

Transparent UART Protocol

JTAG via OpenOCD

Flashing a new ZWIR4512 Firmware

[edit] Downloads

Any software can be found on the Downloads page

[edit] Legacy products

List of legacy products

radino Modules:

• radino Watch

3D Printer

• 3Dino

ICnova CPU-Modules:

• ICnova AP7000 OEM
• ICnova AP7000 OEMplus
• ICnova AP7000 Base
• ICnova SAM9G45+XC3S700AN OEM
• ICnova SAMA5D36 SODIMM
• ICnova i.MX535 SODIMM
• ICnova i.MX536 SODIMM

Application Development Boards:

• ICnova ADB1001
• ICnova ADB1002
• ICnova ADB1003
• ICnova ADB4000
• ICnova ADB4001
• ICnova ADB4003
• ICnova ADB3000
• ADB1002 DVI

DIN Rail Modules:

• DIN Rail Radioadapter
• DIN Rail CPU 61
• DIN Rail CPU 60
• DIN Rail Relais 6I6S
• DIN Rail ADDA 6I4O
• DIN Rail LED-Dimmer
• DIN Rail PWM-Driver